Loctite 7070 Cleaner & Decreaser(ml)

Loctite SF 7070, known as Loctite 7070™, is a non-aqueous, hydrocarbon-based, non-CFC solvent cleaner designed for cleaning and degreasing surfaces before bonding with Loctite adhesives. As a critical final pre-assembly treatment, Loctite SF 7070 surface cleaner removes greases, oils, lubrication fluids, metal cuttings, and fines that would otherwise compromise adhesive performance.

This colourless, low-viscosity hydrocarbon/monoterpene blend can be used as a spray or in immersion cleaning processes at room temperature or heated. Loctite SF 7070 is NSF Category K1 registered for use as a cleaner and degreaser in non-food processing areas, with broad compatibility across metals, plastics, and most elastomers.

Key Features & Benefits

• NSF Category K1 registered – approved cleaner/degreaser for non-food processing areas
• Non-CFC formula – environmentally conscious cleaning solution
• Fast drying – evaporates in 5–20 minutes at room temperature
• Broad plastic compatibility – minimal effect on ABS, PVC, polycarbonate, nylon, and more (per ASTM D543 testing)
• No impact on adhesive cure speed or final strength – purely a surface preparation aid
• Low viscosity (1–2 mPa·s) for thorough surface penetration
• Removes metal cuttings, fines, and lubrication residues before bonding
• Suitable for spray application or immersion cleaning processes

Common Applications

Loctite SF 7070 solvent cleaner is used for:

• Pre-assembly surface cleaning before applying any Loctite adhesive
• Removing oils, greases, and machining fluids from metal parts
• Degreasing in non-food processing industrial areas (NSF K1 compliant)
• Cleaning plastic and elastomer components prior to bonding (check compatibility first)
• Spray or immersion cleaning lines in production environments

How to Use Loctite SF 7070

1. Treat surfaces by spraying or wiping with a solvent-soaked paper towel.
2. Wipe surfaces while still wet with a clean cloth to remove heavy contamination; spray again if needed to allow run-off.
3. Repeat the cleaning process if necessary.
4. Allow the solvent to fully evaporate before bonding to avoid solvent entrapment in the joint.
5. Apply the Loctite adhesive immediately after drying and assemble the bond.

⚠️ Important: This product is flammable. Handle and store in compliance with local regulations; avoid contact with naked flame or non-flameproof electrical equipment.

Buy Loctite SF 7070 surface cleaner at Tapemart – the essential prep step for reliable Loctite adhesive bonds.