Loctite SF 7063 AE – General Purpose Cleaner (400 ml)(roll)

LOCTITE SF 7063, also marketed as LOCTITE 7063, is a fast-evaporating, non-CFC solvent cleaner specifically formulated to clean and degrease metal surfaces prior to bonding with LOCTITE adhesives, threadlockers, retaining compounds, and sealants. Proper surface preparation is one of the most overlooked yet critical steps in achieving maximum adhesive bond strength, and LOCTITE SF 7063 is engineered to remove oils, grease, dirt, and residues that would otherwise compromise cure and adhesion.

Key Features

This clear, colorless solvent blend of isoparaffin, dimethoxymethane, and ethanol has very low viscosity (2 mPa·s) for easy spraying or wiping application, and dries in 60 seconds or less at 20°C, minimizing downtime between cleaning and bonding steps. Unlike traditional CFC-based degreasers, LOCTITE SF 7063 is formulated as an environmentally preferable, non-CFC alternative without sacrificing cleaning performance. Independent of any adhesive chemistry, this cleaner has no effect on the speed of cure or final strength of LOCTITE adhesives — its sole function is delivering a contamination-free bonding surface.

Performance Data

With a specific gravity of 0.74 at 25°C and a TLV (ACGIH) of 600 ppm, LOCTITE SF 7063 is classified as a highly flammable solvent requiring appropriate handling precautions. It's compatible with most metal substrates but can affect certain plastics and coatings, so spot-testing on sensitive materials is recommended before full-scale use. Each production lot is tested to LOCTITE Material Specification standards for consistent infrared spectrum and quality verification.

Applications

LOCTITE SF 7063 solvent cleaner is used across manufacturing, MRO, and assembly environments wherever metal surfaces require degreasing before applying threadlockers, retaining compounds, gasket sealants, or structural adhesives. It's equally effective for general machine component cleaning during maintenance operations, removing built-up oils and contaminants from bearings, housings, fasteners, and tooling. This makes it a staple consumable for facilities running any LOCTITE anaerobic or RTV product line.

Directions for Use

Spray or wipe the target surface using a solvent-soaked paper towel, then wipe while still wet with a clean cloth to lift heavy contamination — repeat as necessary for stubborn residues. Allow LOCTITE SF 7063 to fully evaporate from the surface before bonding to avoid solvent entrapment within the joint, which can interfere with anaerobic cure. Apply the LOCTITE adhesive or sealant immediately after the surface is dry to prevent recontamination. Store the product in its original, unopened container in a dry location between 8°C and 21°C, away from oxidizers and combustible materials, and handle in compliance with flammable materials regulations.

Why Buy From Tapemart

Tapemart stocks genuine LOCTITE SF 7063 solvent cleaner as part of our complete LOCTITE adhesives and surface preparation product line. As an authorized LOCTITE distributor, we help industrial buyers source the right cleaning solvents alongside their threadlockers, retainers, and sealants, ensuring every bonded joint starts with a properly prepared surface. Order LOCTITE SF 7063 from Tapemart for reliable, fast-drying degreasing that maximizes your adhesive bond performance.